By using this website, I accept the use of cookies. Learn More
Maxim Integrated OnDemand Webinar Series at CES 2021

Maxim Integrated is excited to offer a series of OnDemand webinars corresponding with our virtual booth during the CES 2021 virtual event.
See the list of available recordings from our team of experts below, and register for as many as you'd like!

For more information about our virtual booth, visit our main event overview page!
In this 30-minute webinar, Lars explains Trinamics latest stepper motor control technologies including spreadCycle™ & stealthChop™ technologies and shows stepper motors running without audible noise and demonstrates how the sensor less load detection function StallGuard™ can save reference switches and make the system more reliable in the same time.
Speaker: Lars Jaskulski
Lars Jaskulski joined TRINAMIC in 2014 as a Field Applications Engineer with a special Focus on 3D printing. Since then he has been managing the North American sales and Field Applications team. Lars holds a Bachelor of Science in Mechatronics from HAW Hamburg, Germany.

The convenience of a smaller, reversible connector makes USB-C attractive for charging and powering portable devices, including those that traditionally used AC-DC barrel adapters. Advanced features like 5G and 4k displays in portable devices are driving up power consumption over 15W, and higher battery capacities are needed to support longer runtimes. For these gadgets, USB Power Delivery (PD) enables fast charging that gets these products back in operation with little downtime. For designers, however, compliance with the USB-C and USB PD standard typically requires complex firmware development and additional hardware components. This webinar examines how Maxim’s USB-C chargers and out-of-the-box compliant, standalone USB PD controllers reduce development time by eliminating complex firmware and minimize the solution size through greater integration and high performance.
Speaker: Sagar Khare
Sagar Khare is a Business Manager with Maxim’s Mobile Power Battery Management group. He has wide-ranging experience in embedded power conversion, renewable energy and battery management. Sagar holds a Master of Science degree in Electrical Engineering from Stony Brook University and a Master of Business Administration from Arizona State University.

Accurate battery state-of-charge (SOC), long runtime and shelf life, and safety are critical considerations when developing highly reliable Li+ battery-powered portable devices. This webinar explores how to address these challenges using one of Maxim’s latest highly integrated fuel gauges. By implementing the ModelGauge™ m5 EZ algorithm, this fuel gauge eliminates battery characterization for most popular Li+ cells, greatly improving time-to-market. The algorithm leads to an accurate prediction of SOC that improves the user experience as well as enhanced safety across a wide range of benign and harsh operating conditions. Furthermore, the low quiescent current of the IC allows for longer shelf life and longer run-time. Integration of fuel gauge, protection control, and authentication enhances safety and minimizes the bill-of-materials (BOM) and PCB area.
Speaker: Bakul Damle
Bakul Damle is a Business Director at Maxim Integrated, responsible for the battery management product line. His current interests include battery and power management such as fuel gauges, battery safety, protection, and authentication, wireless and USB Type-C/Power Delivery battery chargers. He joined Maxim in 2005 and is based in Dallas, Texas. Prior to Maxim, Bakul managed an engineering team at National Instruments in Austin, developing high-resolution computer-based instruments, and at Digitronics in Pune, India, in the area of power conversion. He holds a Master of Science degree in Electrical Engineering from California Institute of Technology and a Bachelor of Technology in Engineering Physics from the Indian Institute of Technology. Bakul has several patents in the area of test and measurement.

Space constraint, battery life and highest signal fidelity are common challenges when designing precision vital monitoring devices and gadgets that raise the bar in the pro-wearables space.

Our next-generation family of low power SIMO PMICs master these design challenges by providing the world’s smallest solution size with precision signal integrity and highest system efficiency. During this webinar, we will explore a live demo built around the SIMO PMIC featuring:
  • Cut your solution size by half
  • Deliver highest system efficiency to extend battery life by 20% 
  • Provide lowest ripple rejection of 20mVpp
The live demo being showcased is relevant to the current world since it tracks vitals which play a key role in determining COVID-19 symptoms. In addition, the design is applicable for multiple Low Voltage battery applications such as Smart Homes, Artificial Intelligence Assistants, portable at home medical equipment and more. Lastly, the webinar will cover in-depth the SIMO architecture and how it enhances battery life for Li+ applications.
Speakers: Gaurav Mital and Astha Adhikari
Gaurav is the power architect for high performance, computation-intensive PMICs for AI/machine learning platforms and low-power PMIC product line for wearables and hearables platforms at Maxim Integrated. He started his career as an analog power design engineer and has worked in the semiconductor industry for over 15 years on a wide range of mobile power products. He has an M.S. degree in EEE from California State University.

Astha Adhikari is a multi-function power solutions intern at Maxim Integrated. She is getting her Master’s in Electrical Engineering at California Polytechnic University, San Luis Obispo. Her Master’s thesis covers stability analysis for a multiple input single output DC-DC converter. Her areas of interest are power electronics and controls systems.

The demand for highly flexible and adaptive PMICs that power Application Processors (APs) is growing thanks to new Artificial Intelligence (AI) applications like AR/VR, embedded vision, speech processing, 3D image reconstruction, pedestrian detection, and gesture recognition, all of which require deep learning algorithms. APs must be highly flexible and configurable to implement the newest and most efficient algorithms. This mandates having a power solution that adapts and delivers to the dynamic system needs while maintaining low power consumption and maximizing run time. 

In this webinar, Gaurav Mital and Stan Bochenek discuss the challenges of powering APs in AI applications and provide a PMIC example which is best-in-class for size and efficiency. During the webinar a demo featuring NVidia's Jetson™ platform, shows how a computationally-intensive object recognition platform can be powered by Maxim’s high-performance PMIC solution. Learn how to drive your highest energy power needs efficiently for the next wave of AI applications.
Speaker: Gaurav Mital
Gaurav is the power architect for high performance, computation-intensive PMICs for AI/machine learning platforms and low-power PMIC product line for wearables and hearables platforms at Maxim Integrated. He started his career as an analog power design engineer and has worked in the semiconductor industry for over 15 years on a wide range of mobile power products. He has an M.S. degree in EEE from California State University.

Although adding new features to our systems is very important to keep an edge over the competition, there are many situations where improving our system’s reliability is just as important. What’s the point of having a system with many fancy features if it keep breaking in the middle of operation? This webinar will go in-depth on why adding Error Correcting Code (ECC) to the system’s memories is a must to build a robust product.
Speaker: Carlos Rodriguez
Carlos Rodriguez is a Business Manager in the Low-Power Microcontrollers Group at Maxim Integrated. He obtained a double masters (MBA and M.S. in Electrical Engineering) at the University of Texas at Dallas in 2017.

In this 30-minute webinar, Maxim's Kris Ardis discusses the trends driving Artificial Intelligence insights to be made at the edge, and some of the use cases that machine learning technologies can enable in true low-power edge devices and Maxim’s new AI accelerator solutions that enable AI in those edge devices. 
Speaker: Kris Ardis
Kris Ardis joined Maxim in 1997 as a software engineer and has held multiple positions in software development and business management. He is now responsible for Maxim’s Microcontroller, Software, and Artificial Intelligence product offerings. Kris has a B.S. in Computer Science from the University of Texas at Austin. 

Learn how to add security and authenticate automotive endpoints by adding just one chip.
Speaker: Audrey Barber
Audrey Barber has been an Associate Business Manager with Maxim Integrated for the Micros, Security, and Software Business Unit for the past two and a half years. She has worked on promoting automotive security and has published the article “Prevent Automotive Counterfeiting with Secure Authentication” in Electronic Design Magazine. She graduated from Texas A&M University in 2017 with a degree in Electrical Engineering.

Automotive USB ports have a problem. Although vehicle OEMs invest in quality charging technology, passengers bring unsuitable cables into the car. They blame the car for the poor performance since they don’t have the same problem at home. This common scenario is a frustration point for OEMs, but a low-voltage power supply gives them a way to fix it. The technology, called VCONN, communicates with passenger accessories and cables and is a key differentiator for a positive passenger experience. This webinar explains the importance of adding VCONN to OEM RFQ requirements for automotive USB-PD ports as the market shifts from traditional standard A receptacles to newer USB Type-C™ receptacles. It also discusses how adding VCONN to USB-C ports makes it possible to detect and query passenger’s type-C cable identity and performance features.
Speaker: Michael Miskho
Michael Miskho is a USB strategic marketing expert who delivers high-energy keynote presentations that challenge audiences to apply important concepts to everyday experiences. Michael earned his MBA from Arizona State University after using his engineering degree in the computer industry for 10 years. During the last eight years, he has helped consumer product focused busines units establish leadership positions with USB Power Delivery 1.0, 2.0, and 3.0. Most recently Michael has been working in the automotive industry amidst the transition to USB-PD. He has played a key industry role of training and evangelizing the technologies of USB Power Delivery, helping customers and industry partners relate them to real-world use cases and business opportunities.

The use of LEDs is ever-increasing in automotive exterior lighting applications. Gone are the days when LEDs were seen only in the premium space. Today, LEDs have enabled car OEMs and lamp manufacturers to add stylish signatures to different models, create smarter and brighter headlamps, and improve system efficiency.

During this webinar, we will explore unique designs solutions for automotive exterior lighting trends, including:
  • Dynamic and animated lighting that adds style and intelligence
  • Higher efficiency lighting designs to meet stricter CO2 emission standards
  • Simplified lighting solutions that reduce system complexity and cost
LED lighting solutions explored in this webinar are also suitable for industrial and consumer electronics applications. 
Speaker: Yin Wu
Yin is a business professional with over 10 years of experience in the analog semiconductor industry. He has a BSEE from UC Davis, MSEE from San Jose State University, and an MBA from Santa Clara University.
 
© 2021 Maxim Integrated | Contact us | Careers Legal Privacy Cookie Policy | Site Map